China 5.13 Ratio Differential Ring and Pinion Gear Dana30513 for Jeep Jk Wrangler shaft collar dimensions

Product Description

Item Description

Auto Fitment Jeep Wrangler
OE No. D3571FJK
Pace Ratio eight*41
Type Differential Equipment
Content 20CrMnTi/ 8620
Hardness HRC58-sixty two
Therapy Carburizing,Hardening,
tempering,substantial frequency treatment method,black coating,zincing,nickelage

We can make all types of Crown Wheel Pinion as per your drawing or sample by our DHL account.
 

D3571 11/41 CJ5/7/8 DANA thirty Front STD.3.seventy three seventy two-86
D3571TJ 11/41 TJ (ninety seven-06) Front DANA 30 3.seventy three (Quick Fashion)
D3571 ten/41 CJ5/7 DANA thirty Front STD.4.10
D3571R ten/41 YJ(87-95) Front DANA 30 REVERSE 3.seventy three XJ(eighty four-91)
D3571TJ ten/forty one TJ (ninety seven-06) Entrance DANA thirty 4.10 (Short Style)
D3 0571 nine/forty one CJ5/7/8 DANA thirty Entrance STD.4.56 72/86
D3 0571 R nine/41 YJ(87/95) Entrance DANA thirty REVERSE 4.56 XJ(eighty four-ninety one)
D3 0571 TJ 9/forty one TJ(ninety seven-06( FONT DANA 304.56 (Limited Design) XJ(92-01)
D30488 8/39 CJ5/7 DANA thirty Entrance STD.4.88 seventy two-86
D30488R 8/39 YJ(87-ninety five) Entrance DANA DANA 30 REVERSE 4.88 XJ(eighty four-ninety one)
D30488TJ 8/39 TJ Entrance DANA thirty 4.88 (Short Design)
D3571JK 8/forty one YJ(07-21) Front DANA30 5.13 
D35712(47715) 18/forty nine  
D35373 eleven/forty one YJ/TJ DANA 35 REAR 3.seventy three
D35411 ten/41 YJ87-ninety five /TJ97-06/XJ93-07 DANA 35 REAR 4.10
D35456 nine/forty one YJ/TJ DANA 35 REAR 4.fifty six
D35488 eight/39 YJ/TJ DANA 35 REAR 4.88
D44373 11/41 TJ REAR DANA forty four 3.73
D44409 11/forty five TJ REAR DANA forty four 4.ten 22745
D44456R 9/forty one DANA 44 4.56 REVERSE
D44455 11/50 TJ REAR DANA 44 4.fifty six 22105
D44455X 11/fifty  
D44488R eight/39 DANA forty four 4.88 REVERSE
D44489 9/forty four TJ REAR DANA forty four 4.88 23053
D44489X nine/forty four  
D44488X eight/39 RUBICON FROUT/REAR DANA forty four 4.88
D44513R eight/41 DANA forty four 5.13 REVERSE
D44513 eight/41 TJ REAR DANA 44 5.thirteen
D44513X 8/41 RUBICON FROUT/REAR DANA 44 5.thirteen
D5 0571 Sep-41  
D50488 Aug-39  
D5571 Aug-forty one  
D44-4-373 Nov-forty one 85719
D44-4-342 Dec-41 80364
D44-4-353 forty six/thirteen 75945
D44-4-307 forty three/14  
D44-4-346 Nov-38 84707
D44463 37*8 74960
D44410 41*10 80320
D44373 41*11 22736X
D44456 41*nine 85713
D44323 forty two*thirteen 28744
D44331 43*thirteen 23592X
D44307 43*fourteen 22106X
D44354 46*13 22856X
D44427 47*11 23064 JEEP WILLYS 11*47 8125051 ANO 1985(CJ6)
D44427X 47*eleven CHRYSLER
D44538 43*eight  
D44-3-342 41*12 660150
D6571 37*nine 74905 CZPT 3F,D60-411,9X37
D6571 forty one*10 24807(FORD250)
D6571 41*eleven 25538
D6 0571 46*13 24813
D6 0571 forty one*9 FORD F250
D6 0571 X forty one*9  
D6571 41*eight  
D6571R 41*eight  
D60586 forty one*seven  
D6571 forty three*eight Isuzu NHR,D60-586 7*forty one
D6571R forty three*eight  
D60488 39*eight  
D60488R 39*8  
D70488 39*eight 72148
D7571 forty one*ten 72153
D7571 forty one*11 72159
D7571 41*8 72150 C30/P30 F350 41*8 5.3
D7 0571 41*9 72152 CZPT F350 75-80
D7 0571 X 46*13 72168
D70-1-410 41*ten 72154 CZPT F350 BAJA seventy five/80 forty one*ten 4.ten
D70586 41*seven 72156 D300/P300 forty one*7 5.86
D75-410 41*10 BA457171-X CZPT Cargo
D75-462 37*eight BA457104-X
D8571 41*eight 73168
D8571 41*ten 73200
D8571X forty one*40  
D80430 forty three*ten 76128
D80488 39*eight 76138
D80463 37*8 73167
D8571 41*eleven 76256
D8 0571 46*thirteen 73353

Firm Profile

 

HangZhou CZPT Machinery is a specialist manufacture of spiral bevel gear. The business has CNC milling device, the GLEASON milling equipment, rolling inspection machine, equipment measuring center, a entire set of metallographic evaluation, inspection equipment and other related superior products.
Our firm owns gear measuring middle outfitted with sophisticated testing devices this kind of as contourgraph, universal measuring microscope and complete established netlaaographic analysis detector. In accordance to different complex demands and via techniques of sampling, particular inspection and re-examination, multi-indexes of gears like observation, measurement and monitoring can be accomplished.
With our large top quality merchandise, high believability and trusty cooperation, aiming to be a extremely specialised equipment maker of higher amount and all-directional service,we are hunting forward to your  business negotiation and our promising cooperation.

 

FAQ

Q1: Are your products standard?
A: Our design is common, if you have distinct demand, pls notify us the specifics. 
Q2: What is you main classes?
A: Industrial Autos Like Isuzu,Nissan, Hino, CZPT ,Toyota , Mazda ,Suzuki, Agricultural Equipment and Electric powered Storage.
Q3: If we never locate what we want on your site, what ought to we do? 
A: You can electronic mail us the descriptions and images of the merchandise you need to have, we will verify no matter whether we have them. 
B: We produce new things every single month, and some of them have not been uploaded to web site in time. Or you can ship us sample by express, we will create this product for bulk purchasing. 
This fall: What is your conditions of payment?
A: T/T 30% as deposit, and 70% prior to shipping. We will show you the photographs of the merchandise and packages before you spend the harmony.
Q5:Do you test all your items just before shipping and delivery?
Sure, we have a hundred% test ahead of supply.

US $25-50
/ Set
|
10 Sets

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Gear Position: External Gear
Manufacturing Method: Cut Gear
Toothed Portion Shape: Curved Gear
Material: Cast Steel

###

Customization:

###

Car Fitment Jeep Wrangler
OE No. D30513FJK
Speed Ratio 8*41
Type Differential Gear
Material 20CrMnTi/ 8620
Hardness HRC58-62
Treatment Carburizing,Hardening,
tempering,high frequency treatment,black coating,zincing,nickelage

###

D30373 11/41 CJ5/7/8 DANA 30 FRONT STD.3.73 72-86
D30373TJ 11/41 TJ (97-06) FRONT DANA 30 3.73 (SHORT STYLE)
D30410 10/41 CJ5/7 DANA 30 FRONT STD.4.10
D30410R 10/41 YJ(87-95) FRONT DANA 30 REVERSE 3.73 XJ(84-91)
D30410TJ 10/41 TJ (97-06) FRONT DANA 30 4.10 (SHORT STYLE)
D30456 9/41 CJ5/7/8 DANA 30 FRONT STD.4.56 72/86
D30456R 9/41 YJ(87/95) FRONT DANA 30 REVERSE 4.56 XJ(84-91)
D30456TJ 9/41 TJ(97-06( FONT DANA 304.56 (SHORT STYLE) XJ(92-01)
D30488 8/39 CJ5/7 DANA 30 FRONT STD.4.88 72-86
D30488R 8/39 YJ(87-95) FRONT DANA DANA 30 REVERSE 4.88 XJ(84-91)
D30488TJ 8/39 TJ FRONT DANA 30 4.88 (SHORT STYLE)
D30513JK 8/41 YJ(07-21) FRONT DANA30 5.13 
D30272(47715) 18/49  
D35373 11/41 YJ/TJ DANA 35 REAR 3.73
D35411 10/41 YJ87-95 /TJ97-06/XJ93-07 DANA 35 REAR 4.10
D35456 9/41 YJ/TJ DANA 35 REAR 4.56
D35488 8/39 YJ/TJ DANA 35 REAR 4.88
D44373 11/41 TJ REAR DANA 44 3.73
D44409 11/45 TJ REAR DANA 44 4.10 22745
D44456R 9/41 DANA 44 4.56 REVERSE
D44455 11/50 TJ REAR DANA 44 4.56 22105
D44455X 11/50  
D44488R 8/39 DANA 44 4.88 REVERSE
D44489 9/44 TJ REAR DANA 44 4.88 23053
D44489X 9/44  
D44488X 8/39 RUBICON FROUT/REAR DANA 44 4.88
D44513R 8/41 DANA 44 5.13 REVERSE
D44513 8/41 TJ REAR DANA 44 5.13
D44513X 8/41 RUBICON FROUT/REAR DANA 44 5.13
D50456 Sep-41  
D50488 Aug-39  
D50513 Aug-41  
D44-4-373 Nov-41 80229
D44-4-342 Dec-41 80364
D44-4-353 46/13 75945
D44-4-307 43/14  
D44-4-346 Nov-38 84707
D44463 37*8 74960
D44410 41*10 80320
D44373 41*11 22736X
D44456 41*9 80213
D44323 42*13 28744
D44331 43*13 23592X
D44307 43*14 22106X
D44354 46*13 22856X
D44427 47*11 23064 JEEP WILLYS 11*47 8125051 ANO 1985(CJ6)
D44427X 47*11 CHRYSLER
D44538 43*8  
D44-3-342 41*12 660150
D60411 37*9 74905 Toyota 3F,D60-411,9X37
D60410 41*10 24807(FORD250)
D60373 41*11 25538
D60354 46*13 24813
D60456 41*9 FORD F250
D60456X 41*9  
D60513 41*8  
D60513R 41*8  
D60586 41*7  
D60538 43*8 Isuzu NHR,D60-586 7*41
D60538R 43*8  
D60488 39*8  
D60488R 39*8  
D70488 39*8 72148
D70410 41*10 72153
D70373 41*11 72159
D70513 41*8 72150 C30/P30 F350 41*8 5.3
D70456 41*9 72152 FORD F350 75-80
D70354X 46*13 72168
D70-1-410 41*10 72154 FORD F350 BAJA 75/80 41*10 4.10
D70586 41*7 72156 D300/P300 41*7 5.86
D75-410 41*10 BA402071-X Ford Cargo
D75-462 37*8 BA402104-X
D80513 41*8 73168
D80410 41*10 73200
D80410X 41*40  
D80430 43*10 76128
D80488 39*8 76138
D80463 37*8 73167
D80373 41*11 76256
D80354 46*13 73353
US $25-50
/ Set
|
10 Sets

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Gear Position: External Gear
Manufacturing Method: Cut Gear
Toothed Portion Shape: Curved Gear
Material: Cast Steel

###

Customization:

###

Car Fitment Jeep Wrangler
OE No. D30513FJK
Speed Ratio 8*41
Type Differential Gear
Material 20CrMnTi/ 8620
Hardness HRC58-62
Treatment Carburizing,Hardening,
tempering,high frequency treatment,black coating,zincing,nickelage

###

D30373 11/41 CJ5/7/8 DANA 30 FRONT STD.3.73 72-86
D30373TJ 11/41 TJ (97-06) FRONT DANA 30 3.73 (SHORT STYLE)
D30410 10/41 CJ5/7 DANA 30 FRONT STD.4.10
D30410R 10/41 YJ(87-95) FRONT DANA 30 REVERSE 3.73 XJ(84-91)
D30410TJ 10/41 TJ (97-06) FRONT DANA 30 4.10 (SHORT STYLE)
D30456 9/41 CJ5/7/8 DANA 30 FRONT STD.4.56 72/86
D30456R 9/41 YJ(87/95) FRONT DANA 30 REVERSE 4.56 XJ(84-91)
D30456TJ 9/41 TJ(97-06( FONT DANA 304.56 (SHORT STYLE) XJ(92-01)
D30488 8/39 CJ5/7 DANA 30 FRONT STD.4.88 72-86
D30488R 8/39 YJ(87-95) FRONT DANA DANA 30 REVERSE 4.88 XJ(84-91)
D30488TJ 8/39 TJ FRONT DANA 30 4.88 (SHORT STYLE)
D30513JK 8/41 YJ(07-21) FRONT DANA30 5.13 
D30272(47715) 18/49  
D35373 11/41 YJ/TJ DANA 35 REAR 3.73
D35411 10/41 YJ87-95 /TJ97-06/XJ93-07 DANA 35 REAR 4.10
D35456 9/41 YJ/TJ DANA 35 REAR 4.56
D35488 8/39 YJ/TJ DANA 35 REAR 4.88
D44373 11/41 TJ REAR DANA 44 3.73
D44409 11/45 TJ REAR DANA 44 4.10 22745
D44456R 9/41 DANA 44 4.56 REVERSE
D44455 11/50 TJ REAR DANA 44 4.56 22105
D44455X 11/50  
D44488R 8/39 DANA 44 4.88 REVERSE
D44489 9/44 TJ REAR DANA 44 4.88 23053
D44489X 9/44  
D44488X 8/39 RUBICON FROUT/REAR DANA 44 4.88
D44513R 8/41 DANA 44 5.13 REVERSE
D44513 8/41 TJ REAR DANA 44 5.13
D44513X 8/41 RUBICON FROUT/REAR DANA 44 5.13
D50456 Sep-41  
D50488 Aug-39  
D50513 Aug-41  
D44-4-373 Nov-41 80229
D44-4-342 Dec-41 80364
D44-4-353 46/13 75945
D44-4-307 43/14  
D44-4-346 Nov-38 84707
D44463 37*8 74960
D44410 41*10 80320
D44373 41*11 22736X
D44456 41*9 80213
D44323 42*13 28744
D44331 43*13 23592X
D44307 43*14 22106X
D44354 46*13 22856X
D44427 47*11 23064 JEEP WILLYS 11*47 8125051 ANO 1985(CJ6)
D44427X 47*11 CHRYSLER
D44538 43*8  
D44-3-342 41*12 660150
D60411 37*9 74905 Toyota 3F,D60-411,9X37
D60410 41*10 24807(FORD250)
D60373 41*11 25538
D60354 46*13 24813
D60456 41*9 FORD F250
D60456X 41*9  
D60513 41*8  
D60513R 41*8  
D60586 41*7  
D60538 43*8 Isuzu NHR,D60-586 7*41
D60538R 43*8  
D60488 39*8  
D60488R 39*8  
D70488 39*8 72148
D70410 41*10 72153
D70373 41*11 72159
D70513 41*8 72150 C30/P30 F350 41*8 5.3
D70456 41*9 72152 FORD F350 75-80
D70354X 46*13 72168
D70-1-410 41*10 72154 FORD F350 BAJA 75/80 41*10 4.10
D70586 41*7 72156 D300/P300 41*7 5.86
D75-410 41*10 BA402071-X Ford Cargo
D75-462 37*8 BA402104-X
D80513 41*8 73168
D80410 41*10 73200
D80410X 41*40  
D80430 43*10 76128
D80488 39*8 76138
D80463 37*8 73167
D80373 41*11 76256
D80354 46*13 73353

Choosing a Shaft Collar

The shaft collar is a simple machine component used in a variety of power transmission applications. They are most often found on gearboxes and motors. Their simple design makes them an easy component to install and remove. Among other uses, shaft collars are used as bearing faces, mechanical stops, and locating components.
Shaft Collar

Clamp-style shaft collars

Clamp-style shaft collars fix many of the problems associated with set-screw collars. Available in two-piece and one-piece designs, these collars compress the shaft and lock into place. This allows for a uniform distribution of force on the shaft. Clamp-style shaft collars provide more holding power than set-screw collars, but they work best under consistent pressure. Clamp-style shaft collars also work better against negative forces, as they have a separate, un-tightened side.
Clamp-style shaft collars feature mounting holes in the outer diameter. Like clamp-style collars, mountable shaft collars can be installed on adjacent assemblies, but the mounting method does not affect holding power. Mountable shaft collars are commonly used in mounting sensor brackets. They may have rounded or flat outer diameters to accommodate the mounting process. Mountable shaft collars may also have tapped or flat holes to facilitate installation.
Quick-clamp shaft collars have the same functionality as clamp-style collars, but feature a removable lever. They are typically quick-to-install and do not mar the shaft. Quick-clamping collars are especially beneficial in applications that require light-duty torque. They also make for quick and easy adjustments.
Heavy-duty shaft collars feature larger outer diameters, a wider face, and a larger screw. These collars are ideally suited for d-shafting and can offer greater holding power than set-screw collars. These collars are typically manufactured from high-strength 2024 aluminum.
Clamp-style shaft collars can be used in many different applications. They can be used for a variety of applications, including bearings, and are especially suited for rotary machines. However, there are some drawbacks. While they may not be as flexible as set-screw collars, they can still perform well under constant loads. One drawback is that they tend to loosen under shocks and reduce the holding power of clamping hardware.
Another advantage of clamp-style shaft collars is that they do not mar the shaft and allow for easy positioning adjustments. Furthermore, they are easier to install and offer greater holding power than set-screw collars. These collars are made from high-quality materials with tight tolerances and are available in different bore sizes.
Clamp-style shaft collars are the most common type of shaft collars. They can be two-piece or one-piece. Among these, two-piece collars are the most convenient option. One-piece collars are hard to move, and two-piece collars have a hinge on one side and a clamp-style collar on the other side.
The materials used in Clamp-style shaft collars play a crucial role in their overall performance. They should be strong, corrosion-resistant, and have good holding power. They should also be able to withstand high temperatures. The most common materials used for shaft collars are steel and aluminum. Some types are made from stainless steel, while others are made from engineered plastic.
Clamp-style shaft collars can come in two pieces or single-piece designs. The smaller one-piece collars usually have a back-cut opposite the clamp cut, which reduces the cross-sectional area at the hinge point. This reduces the amount of force required to clamp the collar, which makes it easier to use stronger screws.
Shaft Collar

Aluminum, carbon steel, and stainless steel shaft collars

When choosing a shaft collar, you should consider the material it is made of. You can purchase collars made of carbon steel, aluminum, or stainless steel. Each of these materials has its benefits and disadvantages. Steel is more durable than aluminum and tends to provide better holding power. Aluminum, on the other hand, is lighter and has a favorable strength-to-weight ratio. The material you choose should depend on your specific needs, such as corrosion resistance or weight.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. These collars are available with outer diameter holes, flats, or quick-release designs. The material used to make these collars varies, with standard models made of 1215 lead-free steel and 2024 aluminum.
When choosing shaft collars, take into account the material and surface treatment. Different materials offer different properties, which will determine the performance of the collar. In addition to material, each shaft collar comes with a different holding power. Holding power is a key factor in choosing a shaft collar because it determines the amount of load it can withstand without slipping. The holding power depends on the screw size, the bore size, and the bulk of the collar.
Aluminum, carbon steel, and stainless steel shaft-collars can come in various styles. CZPT, for example, offers standard shaft collars in hex and d-bore profiles. Hex collars provide extra holding power and are better than set screws. Additionally, they do not mar the shaft and provide a better grip.
Another type of shaft collar is the quick-clamp shaft collar. These features allow users to install and remove them with ease. The quick-clamp collar has a handle that allows the user to quickly adjust it. While these shaft collars are designed for light duty applications, they are not recommended for heavy-duty or high-RPM applications.
Shaft collars are simple yet versatile components. They are used for various applications, including mechanical stops, stroke limiters, and retainers. They can also be used to align and space other components. Shaft collars are widely used in gearbox assemblies, flagpoles, and medical instruments, among others.
Two-piece shaft collars offer the same benefits of one-piece shaft collars, but offer additional convenience and versatility. They are easier to install and disassemble, reducing installation and labor costs. They also offer superior holding power. They also feature a threaded bore that acts as a positive mechanical stop when the shaft is rotated.
Shaft Collar

Over-torqueing shaft collars

Shaft collars are often used to secure components on shafts or other surfaces. They also provide an easy way to adjust the positioning of motor assembly components. Many different types of shaft collars are available to meet the specific needs of different applications. These include round, hexagonal, square, and D-bore collars.
The design of shaft collars must account for the load they will support. Some collars are made of metals, while others are made of plastic or composite materials. Typically, shaft collars are made of steel, but can also be made from aluminum or alloyed steel. Some are coated with zinc.
Shaft collars are available in one-piece and two-piece designs. Single-piece collars are designed to fit securely around a shaft, while double-piece collars allow for greater clamping force. These collars can be assembled anywhere along the shaft and can be installed between two pieces. They are available in different bore configurations and can be customized to meet your specific application.
Clamp style collars are easy to install and disassemble, and have a larger holding force than one-piece collars. These collars are also more shock-load resistant. They also don’t mar shaft surfaces, unlike setscrews. They can also be easily adjusted without damaging the shaft. Another style of collar is the quick-clamping style. This type of collar doesn’t mar the shaft, and is easily installed and removed without tools. These are best for light-duty applications.
When choosing a shaft collar, you should consider the tolerance of the shaft. It is important to select a shaft with a tight tolerance. The shaft’s hardness should not be greater than Rockwell C35. A wide tolerance will affect the holding power of the collar. If the shaft is undersized, you may need to use a screwdrive to slide the collar on the shaft.
Shaft collars are a versatile component with many different applications. They can secure industrial railings or serve as positioning devices in medical equipment. They are also widely used in automation machinery. They are used to protect cylinders and actuators and to ensure alignment between components. For this reason, they are very versatile and adaptable.
Clamp-style collars work well under constant loads, but they may need assistance during impact loads. Shock loads can be difficult to avoid, especially if the mass is small. Clamp-style collars with an undercut in the shaft help to resist the impact of shock. Moreover, they offer positive stops in both axial directions.
Clamp-style shaft collars are a good alternative for set-screw collars. They are easy to install and prevent shaft damage. They also come with an added advantage of being easy to adjust. Clamp-style shaft collars have double the holding power of set-screw collars.
In addition to holding components, shaft collars can also function as spacers and limit shaft movement. They are essential for many applications. They are commonly used in motors and gearboxes to ensure correct positioning for power transmission. They are also used to control shaft movement in reciprocating applications.
China 5.13 Ratio Differential Ring and Pinion Gear Dana30513 for Jeep Jk Wrangler     shaft collar dimensionsChina 5.13 Ratio Differential Ring and Pinion Gear Dana30513 for Jeep Jk Wrangler     shaft collar dimensions
editor by czh 2023-01-30